Zebra ZD620 - SETTINGS Menu; DARKNESS

75
Printer Configuration Menus
SETTINGS Menu
DARKNESS
Description: Set the print darkness to the lowest setting that provides good print quality.
If you set the darkness too high, the label image may not print clearly, barcodes may not
scan correctly, the ribbon may burn through, or the printhead may wear prematurely.
If desired, use the Print Quality Report (FEED self test) to determine the best darkness
setting.
Accepted values: 0.0 to 30.0
Related ZPL command(s): ^MD,~SD
SGD command used: print.tone
Print Server web page: View and Modify PrinterSettings
> General Setup >
Darkness
SETTINGS
—
DARKNESS
—
PRINT SPEED
—
MEDIA TYPE
—
PRINT METHOD
—
TEAR OFF
—
PRINT WIDTH
—
PRINT MODE
—
LABEL TOP
—
LEFT POSITION
—
REPRINT MODE
—
LABEL LENGTH MAX
—
LANGUAGE