120
Printer Configuration Menus
RESET NETWORK
Description: This option resets the wired or wireless print server and saves any changes
that you made to any network settings.
Important • The print server must be reset to allow changes to the network settings to take effect.
Related ZPL command(s): ~WR
SGD command used: device.reset
Print Server web page: Print Server Settings > Reset Print Server
NETWORK
—
ACTIVE PRINT SERVER
—
PRIMARY NETWORK
—
WIRED IP ADDRESS
—
WIRED SUBNET MASK
—
WIRED GATEWAY
—
WIRED IP PROTOCOL
—
WIRED MAC ADDRESS
—
WLAN IP ADDRESS
—
WLAN SUBNET MASK
—
WLAN GATEWAY
—
WLAN IP PROTOCOL
—
WLAN MAC ADDRESS
—
ESSID
—
CHANNEL
—
SIGNAL
—
IP PORT
—
IP ALTERNATE PORT
—
PRINT INFORMATION
—
RESET NETWORK
—
VISIBILITY AGENT
—
LOAD DEFAULTS
To Next Page
Loading...