231
USB Host Port and Link-OS Demonstration Examples
Exercise 1: Advanced User Information
See the ZPL Programming Guide for more information about these commands.
Enable/disable mirroring:
!U1setvar"usb.mirror.enable""value" — Values: "on" or "off"
Enable/disable automatic mirroring that occurs when a USB Flash drive is inserted
into the USB host port:
!U1setvar"usb.mirror.auto""value" — Values: "on" or "off"
Mirror Operation Retry Number — Specify the number of times that the mirror
operation will be repeated if it fails:
!U1setvar"usb.mirror.error_retry""value" — Values: 0 to 65535
Change File Path FROM USB — Reprogram the file location the printer searches to
retrieve files from the USB memory during Mirror operations.
!U1setvar"usb.mirror.appl_path""new_path" — Default: "zebra/appl"
Change File Path TO USB — Reprogram the file location the printer places files into
USB memory during Mirror operations.
!U1setvar"usb.mirror.path""path" — Default: "zebra"
Enable/disable the USB Host port
!U1setvar"usb.host.lock_out""value" — Values: "
on" or "off"
To Next Page
Loading...