Chapter 7 Connection Status
AX/DX/EX/PX Series User’s Guide
192
Figure 79 WiFi Settings: Configuration
Each field is described in the following table.
Table 36 WiFi Settings: Configuration
LABEL DESCRIPTION
Keep 2.4G, 5G and
6G the same
Select this and the 2.4 GHz, 5 GHz and 6GHz wireless networks will use the same SSID.
If you deselect this, the screen will change. You need to assign different SSIDs for the 2.4 GHz
and 5 GHz wireless networks.
2.4G / 5G / 6G WiFi Click this switch to enable or disable the 2.4G / 5G / 6G WiFi network. When the switch turns
blue , the function is enabled.
WiFi Name The SSID (Service Set IDentity) identifies the service set with which a WiFi device is associated.
WiFi devices associating to the access point (AP) must have the same SSID.
Enter a descriptive name for the WiFi. You can use up to 32 printable characters, including
spaces.
WiFi Password If you selected Random Password, this field displays a pre-shared key generated by the Zyxel
Device.
If you did not select Random Password, you can manually enter a pre-shared key from 8 to
63 alphanumeric (0-9, a-z, A-Z) and special characters, including spaces.
Click the Eye icon to show or hide the password for your WiFi network. When the Eye icon is
slashed , you will see the password in plain text. Otherwise, it is hidden.
Random Password Select this to have the Zyxel Device automatically generate a password. The WiFi Password
field will not be configurable when you select this option.
Hide WiFi network
name
Select this to hide the SSID in the outgoing beacon frame so a station cannot obtain the SSID
through scanning using a site survey tool.
Note: Disable WPS in the Network Setting > Wireless > WPS screen to hide the SSID.
Save Click Save to save your changes.
To Next Page
Loading...
Need help?
General
