Chapter 8 Broadband
AX/DX/EX/PX Series User’s Guide
214
8.3.1 Add or Edit Internet Connection
Click Add New WAN Interface in the Broadband screen or the Edit icon next to an existing WAN
interface to open the following screen. Use this screen to configure a WAN connection. The screen
varies depending on the mode, encapsulation, and IPv6 or IPv4 mode you select.
Routing Mode
Use Routing mode if your ISP give you one IP address only and you want multiple computers to share an
Internet account.
The following example screen displays when you select the Routing mode and PPPoE encapsulation. The
screen varies when you select other encapsulation and IPv6 or IPv4 mode.
MLD Proxy This shows whether Multicast Listener Discovery (MLD) is activated or not for this connection. MLD
is not available when the connection uses the bridging service.
Modify Click the Edit icon to configure the WAN connection.
Click the Delete icon to remove the WAN connection.
Table 47 Network Setting > Broadband (continued)
LABEL DESCRIPTION