AX/DX/EX/PX Series User’s Guide
467
CHAPTER 35
System
35.1 System Overview
Use this screen to name your Zyxel Device (Host) and give it an associated domain name for
identification purposes.
35.2 System
Click Maintenance > System to open the following screen. Assign a unique name to the Zyxel Device so
it can be easily recognized on your network. You can use up to 30 printable characters except [ " ], [ ` ],
[ ' ], [ < ], [ > ], [ ^ ], [ $ ], [ | ], [ & ], or [ ; ]. Spaces are allowed.
Figure 259 Maintenance > System
The following table describes the labels in this screen.
Table 179 Maintenance > System
LABEL DESCRIPTION
Host Name Enter a descriptive host name for your Zyxel Device. You can use up to 30 printable characters
except [ " ], [ ` ], [ ' ], [ < ], [ > ], [ ^ ], [ $ ], [ | ], [ & ], or [ ; ]. Spaces are allowed.
For some models, the supported maximum input length is 16 alphanumeric characters.
Domain Name Enter a domain name for your host Zyxel Device. You can use up to 30 printable characters
except [ " ], [ ` ], [ ' ], [ < ], [ > ], [ ^ ], [ $ ], [ | ], [ & ], or [ ; ]. Spaces are allowed.
Cancel Click Cancel to abandon this screen without saving.
Apply Click Apply to save your changes.
To Next Page
Loading...
Need help?
General
