Chapter 7 Connection Status
AX/DX/EX/PX Series User’s Guide
194
Figure 82 Guest WiFi Settings: Different SSIDs
Each field is described in the following table.
7.2.1 LAN
Use this screen to view the LAN IP address, subnet mask, and DHCP settings of your Zyxel Device. Click
the switch button to turn on/off the DHCP server.
Table 37 WiFi Settings: Configuration
LABEL DESCRIPTION
2.4G/5G/6G WiFi Click this switch to enable or disable the 2.4 GHz / 5 GHz / 6GHz WiFi networks. When the
switch goes to the right , the function is enabled. Otherwise, it is not.
WiFi Name The SSID (Service Set IDentity) identifies the service set with which a wireless device is
associated. Wireless devices associating to the access point (AP) must have the same SSID.
Enter a descriptive name (up to 32 printable characters, including spaces) for the WiFi.
WiFi Password If you selected Random Password, this field displays a pre-shared key generated by the Zyxel
Device.
If you did not select Random Password, you can manually enter a pre-shared key from 8 to
64 alphanumeric (0-9, a-z, A-Z) and special characters, including spaces.
Strength This displays the current password strength – weak, medium, strong.
Click the Eye icon to show or hide the password of your WiFi network. When the Eye icon is
slashed , you will see the password in plain text. Otherwise, it is hidden.
Random Password Select this option to have the Zyxel Device automatically generate a password. The WiFi
Password field will not be configurable when you select this option.
Hide WiFi network
name
Select this check box to hide the SSID in the outgoing beacon frame so a station cannot
obtain the SSID through scanning using a site survey tool.
Note: Disable WPS in the Network Setting > Wireless > WPS screen to hide the SSID.
Save Click Save to save your changes.
To Next Page
Loading...
Need help?
General
