ZyXEL Communications AX Series User Manual

Chapter 6 App Tutorials
AX/DX/EX/PX Series User’s Guide
134
6.4 MPro Mesh Network Connection
If you are setting up the MPro Mesh network with an MPro Mesh Router and an MPro Mesh Extender, you
can connect your MPro Mesh Router (ZD) with an MPro Mesh Extender (E) using a WiFi or wired
connection.
Figure 67 WiFi Connection
Figure 68 Wired Connection
If you are setting up the MPro Mesh network with a non-MPro Mesh Router and an MPro Mesh Extender,
connect your non-MPro Mesh Router (R) with an MPro Mesh Extender (E) using a wired connection.
Figure 69 Wired Connection
6.4.1 Preparing your Zyxel Device
Make sure MPro Mesh is enabled on both the MPro Mesh Router and the MPro Mesh Extender. If not,
follow the steps below to enable MPro Mesh.
Note: MPro Mesh is enabled on the MPro Mesh Router and MPro Mesh Extender by default.
Enable MPro Mesh on your MPro Mesh Router:
1 In Network Setting > Wireless > MESH, click the switch button to enable MPro Mesh.
2 Click Apply.

ZyXEL Communications AX Series Specifications

General

Brand	ZyXEL Communications
Model	AX Series
Category	Network Router
Language	English