Chapter 27 Traffic Status
AX/DX/EX/PX Series User’s Guide
449
27.4 NAT Status
Click System Monitor > Traffic Status > NAT to open the following screen. This screen lists the devices that
have received an IP address from the Zyxel Device LAN or WLAN interfaces and have ever established a
session with the Zyxel Device.
Figure 250 System Monitor > Traffic Status > NAT
The following table describes the fields in this screen.
Table 170 System Monitor > Traffic Status > NAT
LABEL DESCRIPTION
Refresh Interval Select how often you want the Zyxel Device to update this screen.
Device Name This displays the name of the connected host.
IPv4 Address This displays the IP address of the connected host.
MAC Address This displays the MAC address of the connected host.
No. of Open
Sessions
This displays the number of NAT sessions currently opened for the connected host.
Total
This displays what percentage of NAT sessions the Zyxel Device can support is currently being
used by all connected hosts. You can also see the number of active NAT sessions and the
maximum number of NAT sessions the Zyxel Device can support
To Next Page
Loading...
Need help?
General
