Chapter 25 Voice
AX/DX/EX/PX Series User’s Guide
426
Figure 237 VoIP > Phone > Phone Device > Edit
Each field is described in the following table.
25.7 Phone Region
Use this screen to configure settings that depend on which region of the world the Zyxel Device is in.
Selecting the region where the device is physically located improves the quality of phone calls.
Table 155 VoIP > Phone > Phone Device > Edit
LABEL DESCRIPTION
SIP Account to
Make Outgoing
Call
Select the SIP account you want to use when making outgoing calls with the analog
phone connected to this phone port.
SIP Account(s) to
Receive Incoming
Call
Select a SIP account if you want to receive phone calls for the selected SIP account
on this phone port.
If you select more than one SIP account for incoming calls, there is no way to
distinguish between them when you receive phone calls. If you do not select a
source for incoming calls, you cannot receive any calls on this phone port.
Immediate Dial
Enable
Select this if you want to use the pound key (#) to tell the Zyxel Device to make the
phone call immediately, instead of waiting for the number of second you selected
in the Dialog Interval Selection field of the VoIP > SIP > SIP Service Provider > Add
New Provider or Edit screen.
If you select this, dial the phone number, and then press the pound key. The Zyxel
Device makes the call immediately instead of waiting. You can still wait, if you want.
Cancel Click Cancel to exit this screen without saving
OK Click OK to save your changes.
To Next Page
Loading...
Need help?
General
