AX/DX/EX/PX Series User’s Guide
446
CHAPTER 27
Traffic Status
27.1 Traffic Status Overview
Use the Traffic Status screens to look at the network traffic status and statistics of the WAN/LAN interfaces
and NAT.
27.1.1 What You Can Do in this Chapter
• Use the WAN screen to view the WAN traffic statistics (Section 27.2 on page 446).
• Use the LAN screen to view the LAN traffic statistics (Section 27.3 on page 448).
• Use the NAT screen to view the NAT status of the Zyxel Device‘s clients (Section 27.4 on page 449).
27.2 WAN Status
Click System Monitor > Traffic Status to open the WAN screen. The figures in this screen show the number
of bytes received and sent through the Zyxel Device’s WAN interface. The table below shows packet
statistics for each WAN interface.