Chapter 14 DNS
AX/DX/EX/PX Series User’s Guide
351
14.1.2 What You Need To Know
DYNDNS Wildcard
Enabling the wildcard feature for your host causes *.yourhost.dyndns.org to be aliased to the same IP
address as yourhost.dyndns.org. This feature is useful if you want to be able to use, for example,
www.yourhost.dyndns.org and still reach your hostname.
If you have a private WAN IP address, then you cannot use Dynamic DNS.
14.2 DNS Entry
DNS (Domain Name System) is used for mapping a domain name to its corresponding IP address and
vice versa. Use this screen to view and configure manual DNS entires on the Zyxel Device. Click Network
Setting > DNS to open the DNS Entry screen.
Note: The host name should consist of the host’s local name and the domain name. For
example, Mycomputer.home is a host name where Mycomputer is the host’s local
name, and .home is the domain name.
Figure 184 Network Setting > DNS > DNS Entry
The following table describes the fields in this screen.
Table 112 Network Setting > DNS > DNS Entry
LABEL DESCRIPTION
Add New DNS Entry Click this to create a new DNS entry.
# This is the index number of the entry.
HostName This indicates the host name or domain name.
IP Address This indicates the IP address assigned to this computer.
Modify Click the Edit icon to edit the rule.
Click the Delete icon to delete an existing rule.
To Next Page
Loading...
Need help?
General
