Chapter 7 Connection Status
AX/DX/EX/PX Series User’s Guide
191
7.1.4 WiFi Settings
Use this screen to enable or disable the main WiFi network. When the switch turns blue, the function is
enabled. You can use this screen or the QR code on the upper right corner to check the SSIDs (WiFi
network name) and passwords of the main WiFi networks. If you want to show or hide your WiFi
passwords, click the Eye icon ( ).
Figure 78 WiFi Settings
Click the Arrow icon ( ) to configure the SSIDs and/or passwords for your main WiFi networks. Click the
Eye icon ( ) to display the characters as you enter the WiFi Password.
Scanning the QR code is an alternative way to connect your WiFi client to the WiFi network.
Note: When you enable MPro Mesh in the Network > Wireless > MESH screen, Keep 2.4G, 5G
and 6G the same will be enabled and cannot be disabled.
Security This displays the type of security mode the WiFi interface is using in the WLAN.
802.11 Mode This displays the type of 802.11 mode the WiFi interface is using in the WLAN.
WPS This displays whether WPS is activated on the WiFi interface.
Table 35 System Info: Detailed Information (continued)
LABEL DESCRIPTION
To Next Page
Loading...
Need help?
General
