Chapter 17 Interface Grouping
AX/DX/EX/PX Series User’s Guide
367
The following table describes the fields in this screen.
Table 120 Network Setting > Interface Grouping > Interface Group Configuration: Add
LABEL DESCRIPTION
Source MAC
Address
Enter the source MAC address of the packet.
APAS MAC Filter Select this option and enter the MAC address of the matched LAN host.
DHCP Option 60 Select this option and enter the Vendor Class Identifier (Option 60) of the matched traffic,
such as the type of the hardware or firmware.
Enable
wildcard
Select this option to be able to use wildcards in the Vendor Class Identifier configured for
DHCP option 60.
DHCP Option 61 Select this and enter the device identity of the matched traffic.
Enter the Identity Association Identifier (IAID) of the device, for example, the WAN connection
index number.
DHCP Option 125 Select this and enter vendor specific information of the matched traffic.
Enterprise
Number
Enter the vendor’s 32-bit enterprise number registered with the IANA (Internet Assigned
Numbers Authority).
Manufacturer
OUI
Specify the vendor’s OUI (Organization Unique Identifier). It is usually the first 3 bytes of the
MAC address.
Serial Number Enter the serial number of the device.
Product Class Enter the product class of the device.
VLAN Group Select this and the VLAN group of the matched traffic from the drop-down list box. A VLAN
group can be configured in Network Setting > VLAN Group.
Cancel Click Cancel to exit this screen without saving.
OK Click OK to save your changes.
To Next Page
Loading...
