Chapter 22 Parental Control
AX/DX/EX/PX Series User’s Guide
394
Figure 215 Security > Parental Control
The following table describes the fields in this screen.
Table 137 Security > Parental Control
LABEL DESCRIPTION
General
Parental Control Select Enable to activate parental control on the Zyxel Device.
Parental Control Profile (PCP)
Add new PCP Click this if you want to configure a new Parental Control Profile (PCP).
# This shows the index number of the rule.
Status This indicates whether the rule is active or not.
A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not active
PCP Name This shows the name of the rule.
Home Network
User MAC
This shows the MAC address of the LAN user’s computer to which this rule applies.
Internet Access
Schedule
This shows the days and time on which parental control is enabled.
Network Service This shows whether the network service is configured. If not, None will be shown.
Website
Blocked
This shows whether the website block is configured. If not, None will be shown.
Modify Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to delete an existing rule.
Cancel Click Cancel to restore your previously saved settings.
Apply Click Apply to save your changes.
To Next Page
Loading...
Need help?
General
