Chapter 3 Web Configurator
AX/DX/EX/PX Series User’s Guide
70
Cellular Backup Use this screen to configure a cellular WAN connection as a backup to
keep you online if the primary WAN connection fails.
Advanced Use this screen to enable or disable PTM over ADSL, Annex M/Annex J,
and DSL PhyR functions.
Backup WAN Use this screen to convert the LAN port as a WAN port, or reset the WAN
port to LAN port.
Wireless General Use this screen to configure the WiFi settings and WiFi authentication or
security settings.
Guest/More AP Use this screen to configure multiple BSSs on the Zyxel Device.
MAC
Authentication
Use this screen to block or allow wireless traffic from wireless devices of
certain SSIDs and MAC addresses to the Zyxel Device.
WPS Use this screen to configure and view your WPS (WiFi Protected Setup)
settings.
WMM Use this screen to enable or disable WiFi MultiMedia (WMM).
Others Use this screen to configure advanced WiFi settings.
Channel Status Use this screen to scan WiFi channel noises and view the results.
MESH Use this screen to enable or disable MPro Mesh.
Home
Networking
LAN Setup Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
Static DHCP Use this screen to assign specific IP addresses to individual MAC
addresses.
UPnP Use this screen to turn UPnP and UPnP NAT-T on or off.
Additional
Subnet
Use this screen to configure IP alias and public static IP.
STB Vendor ID Use this screen to configure the Vendor IDs of the connected Set Top Box
(STB) devices, which have the Zyxel Device automatically create static
DHCP entries for the STB devices when they request IP addresses.
Wake on LAN Use this screen to remotely turn on a device on the local network.
TFTP Server Name Use DHCP option 66 to identify a TFTP server name.
APAS Use this screen to allow a LAN device to use any available port to access
any available service from a remote WAN device.
Routing Static Route Use this screen to view and set up static routes on the Zyxel Device.
DNS Route Use this screen to forward DNS queries for certain domain names through
a specific WAN interface to its DNS servers.
Policy Route Use this screen to configure policy routing on the Zyxel Device.
RIP Use this screen to configure Routing Information Protocol to exchange
routing information with other routers.
QoS General Use this screen to enable QoS and traffic prioritizing. You can also
configure the QoS rules and actions.
Queue Setup Use this screen to configure QoS queues.
Classification
Setup
Use this screen to define a classifier.
Shaper Setup Use this screen to limit outgoing traffic rate on the selected interface.
Policer Setup Use this screen to configure QoS policers.
Monitor Use this screen to view statistics of QoS on WAN/LAN interface and the
status of queues.
NAT Port Forwarding Use this screen to make your local servers visible to the outside world.
Table 24 Navigation Panel Summary (continued)
LINK TAB FUNCTION
To Next Page
Loading...
Need help?
General
