ZyXEL Communications GS2220 Series - Interface Setup

Chapter 8 Basic Setting
GS2220 Series User’s Guide
120
8.9 Inte rfa c e Se tup
An IPv6 address is configured on a per-interface basis. The interface can be a physical interface (for
example, an Ethernet port) or a virtual interface (for example, a VLAN). The Switch supports the VLAN
interface type for IPv6 at the time of writing.
Use this screen to set IPv6 interfaces on which you can configure an IPv6 address to access and
manage the Switch.
Click Ba sic Se tting > Inte rfa c e Se tup in the navigation panel to display the configuration screen.
Fig ure 95 Basic Setting > Interface Setup
The following table describes the labels in this screen.
Table 37 Basic Setting > Interface Setup
LABEL DESCRIPTIO N
Interface Type Select the type of IPv6 interface for which you want to configure. The Switch supports the VLAN
interface type for IPv6 at the time of writing.
Interface ID Specify a unique identification number (from 1 to 4094) for the interface.
To have IPv6 function properly, you should configure a static VLAN with the same ID number in the
Adva nc e d App lic a tio n > VLAN screens.
Add Click this to create a new entry.
This saves your changes to the Switch’s run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the Sa ve link on the top navigation panel to save your changes
to the non-volatile memory when you are done configuring.
Cancel Click C a nc e l to reset the fields to your previous configuration.
Index This field displays the index number of an entry.
Interface Type This field displays the type of interface.
Interface ID This field displays the identification number of the interface.
Interface This field displays the interface’s descriptive name which is generated automatically by the
Switch. The name is from a combination of the interface type and ID number.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete Click De le te to remove the selected entry from the summary table.
Cancel Click C a nc e l to clear the check boxes.