ZyXEL Communications GS2220 Series - LLDP Remote Port Status Detail

Chapter 36 Link Layer Discovery Protocol (LLDP)
GS2220 Series User’s Guide
326
36.5.1 LLDP Re mo te Po rt Sta tus De ta il
This screen displays detailed LLDP status of the remote device connected to the Switch. Click Adva nc e d
Applic a tio n > LLDP > LLDP Re m o te Sta tus (Clic k He re ) and then click an index number, for example 1, in
the Inde x column in the LLDP Re mote Sta tus screen to display the screen as shown next.
Fig ure 248 Advanced Application > LLDP > LLDP Remote Status > LLDP Remote Port Status Detail (Basic
TLV)
The following table describes the labels in Basic TLV part of the screen.
System Name This displays the system name of the remote device.
Management
Address
This displays the management address of the remote device. It could be the MAC address or
IP address.
Table 162 Advanced Application > LLDP > LLDP Remote Status (continued)
LABEL DESC RIPTIO N
Table 163 Advanced Application > LLDP > LLDP Remote Status > LLDP Remote Port Status Detail (Basic
TLV)
LABEL DESC RIPTIO N
Local Port This displays the number of the Switch’s port to which the remote device is connected.
Basic TLV
Chassis ID TLV • Cha ssis ID Sub type – this displays how the chassis of the remote device is identified.
• C ha ssis ID – this displays the chassis ID of the remote device. The chassis ID is identified by
the chassis ID subtype.
Port ID TLV • Po rt ID Sub type – this displays how the port of the remote device is identified.
• Po rt ID – this displays the port ID of the remote device. The port ID is identified by the port
ID subtype.
Time To Live TLV This displays the time-to-live (TTL) multiplier of LLDP frames. The device information on the
neighboring devices ages out and is discarded when its corresponding TTL expires. The TTL
value is to multiply the TTL multiplier by the LLDP frames transmitting interval.
Port Description
TLV
This displays the remote port description.