ZyXEL Communications GS2220 Series - Viewing and Editing Classifier Configuration Summary

Chapter 21 Classifier
GS2220 Series User’s Guide
212
21.3.1 Vie wing a nd Editing C la ssifie r C o nfig ura tio n Sum ma ry
To view a summary of the classifier configuration, scroll down to the summary table at the bottom of the
Cla ssifie r screen. To change the settings of a rule, click a number in the Inde x field.
Note: When two rules conflict with each other, a higher layer rule has priority over lower layer
rule.
Fig ure 165 Advanced Application > Classifier > Classifier Configuration: Summary Table
The following table describes the labels in this screen.
The following table shows some other common Ethernet types and the corresponding protocol number.
Table 89 Advanced Application > Classifier > Classifier Configuration: Summary Table
LABEL DESC RIPTIO N
Index This field displays the index number of the rule. Click an index number to edit the rule.
Active This field displays Ye s when the rule is activated and No when it is deactivated.
Weight The field displays the priority of the rule when the match order is in m a nua l mode. A higher weight
means a higher priority.
Name This field displays the descriptive name for this rule. This is for identification purpose only.
Rule This field displays a summary of the classifier rule’s settings.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the table
heading row to select all entries.
Delete Click De le te to remove the selected entry from the summary table.
Cancel Click Ca nc e l to clear the check boxes.
Table 90 Common Ethernet Types and Protocol Numbers
ETHERNET TYPE PRO TO C O L NUMBER
IP ETHII 0800
X.75 Internet 0801
NBS Internet 0802
ECMA Internet 0803
Chaosnet 0804
X.25 Level 3 0805
XNS Compat 0807
Banyan Systems 0BAD
BBN Simnet 5208
IBM SNA 80D5
AppleTalk AARP 80F3