ZyXEL Communications GS2220 Series - Web Configurator; C Ha Pte R 4 We B C O Nfig Ura to R; Overview; System Login

GS2220 Series User’s Guide
50
C HAPTER 4
We b Co nfig ura tor
4.1 O ve rvie w
This section introduces the configuration and functions of the Web Configurator.
The Web Configurator is an HTML-based management interface that allows easy system setup and
management through Internet browser. Use a browser that supports HTML5, such as Microsoft Edge,
Internet Explorer 11, Mozilla Firefox, or Google Chrome. The recommended minimum screen resolution
is 1024 by 768 pixels.
In order to use the Web Configurator you need to allow:
• Web browser pop-up windows from your device.
• JavaScript (enabled by default).
• Java permissions (enabled by default).
4.2 Syste m Lo g in
1 Start your web browser.
2 The Switch is a DHCP client by default. Type “http://DHCP-assigned IP” in the Lo c a tio n or Addre ss field.
Press [ENTER].
If the Switch is not connected to a DHCP server, type “http://” and the static IP address of the Switch (for
example, the default management IP address is 192.168.1.1 through an in-band port) in the Lo c a tio n or
Addre ss field. Press [ENTER]. Your computer must be in the same subnet in order to access this website
address.
Also, you can use the ZON Utility to check your Switch’s IP address. See
Section 4.3 on page 54 for more
information on the ZON utility.
3 The following screen appears.