Chapter 4 Web Configurator
GS2220 Series User’s Guide
69
4.5 We b Co nfig ura to r La yo ut
The Sta tus screen is the first screen that displays when you access the Web Configurator.
This guide uses GS2220-10HP and GS2220-50HP screens as examples. The screens may very slightly for
IP Interface This field displays whether the WAN interface is using a DHCP IP address or a static IP
address.
VID This field displays the VLAN ID.
IP Address This field displays the Switches’ IP address for it to be managed over the network.
IP Subnet Mask This field displays the subnet mask that specifies the network number portion of an IP
address.
Default Gateway This field displays the IP address of the default outgoing gateway in dotted decimal
notation, for example 192.168.1.254.
DNS Server This field displays the DNS (Domain Name System) for mapping a domain name to its
corresponding IP address and vice versa.
Change administrator's password and activate SNMP
New Password This field displays asterisks when a new password has been created.
SNMP This field displays whether the Switch acts as an SNMP agent.
Version This field displays the SNMP version for the Switch.
Get Community This field displays the Ge t Co mm unity string.
Set Community This field displays the Se t C o mm unity string.
Trap Community This field displays the Tra p C o m m unity string.
Networked AV – Advanced Settings
Networked AV VLAN This field displays the VLAN ID for the AVoIP network.
Networked AV VLAN
IP
This field displays the corresponding VLAN ID’s IP address for the AVoIP network.
IGMP Snooping This field displays Ac tive when IGMP Snooping is enabled to forward group multicast traffic
only to ports that are members of that group.
Otherwise, it displays Ina c tive .
IGMP Snooping
Querier
This field displays A c tive when the Switch is allowed to send IGMP General Query messages
to the VLANs with the multicast hosts attached.
Otherwise, it displays Ina c tive .
Unknown Multicast
Frame
This field displays the action to perform when the Switch receives an unknown multicast
frame. It displays Dro p when the frames are discarded. It displays Flo o ding when the frames
are sent to all ports.
Transmitter/Receiver
Connected Port
This field shows the Switches’ port numbers for connection to networked audio and video
equipment.
Inter-switch
Connected Port (Link
Aggregation)
This field shows the Switches’ port numbers for connection to another switch.
Previous Click Pre vio us to show the previous screen.
Finish Review the information and click Finish to create the task.
Cancel Click Ca nc e l to exit this screen without saving.
Table 16 Wizard > Advanced Settings > Step 4 Summary (continued)
LABEL DESC RIPTIO N
To Next Page
Loading...
