GS2220 Series User’s Guide
336
36.9 LLDP- MED Lo c a tio n
Click Adva nc e d Applic a tio n > LLDP > LLDP- MED Lo c a tio n (C lic k He re ) to display the screen as shown
next.
DSCP Enter the DSCP value of the network policy. The value is defined from 0 through 63 with the 0
representing use of the default DSCP value.
Priority Enter the priority value for the network policy.
Add Click Add after finish entering the network policy information. A summary table will list all the
Switch you have added.
Cancel Click C a nc e l to begin entering the information afresh.
Index This field displays the of index number of the network policy. Click an index number to edit
the rule.
Port This field displays the port number of the network policy.
Application Type This field displays the application type of the network policy.
Tag This field displays the Tag Status of the network policy.
VLAN This field displays the VLAN ID of the network policy.
Priority This field displays the priority value of the network policy.
DSCP This field displays the DSCP value of the network policy.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete Check the rules that you want to remove, then click the De le te button.
Cancel Click C a nc e l to clear the selected check boxes.
Table 170 Advanced Application > LLDP > LLDP-MED Network Policy (continued)
LABEL DESC RIPTIO N
To Next Page
Loading...
