Chapter 57 Port Status
GS2220 Series User’s Guide
451
57.2.1 Po rt De ta ils
Click a number in the Po rt column in the Port Sta tus screen to display individual port statistics. Use this
screen to check status and detailed performance data about an individual port on the Switch.
PD For PoE models only.
This field displays whether or not a powered device (PD) is allowed to receive power from the
Switch on this port.
LACP This fields displays whether LACP (Link Aggregation Control Protocol) has been enabled on the
port.
TxPkts This field shows the number of transmitted frames on this port.
RxPkts This field shows the number of received frames on this port.
Errors This field shows the number of received errors on this port.
Tx KB/s This field shows the number of kilobytes per second transmitted on this port.
Rx KB/s This field shows the number of kilobytes per second received on this port.
Up Time This field shows the total amount of time in hours, minutes and seconds the port has been up.
Clear Counter Select Po rt, enter a port number and then click Cle a r Co unte r to erase the recorded statistical
information for that port, or select Any to clear statistics for all ports.
Table 236 Management > Port Status (continued)
LABEL DESCRIPTIO N
To Next Page
Loading...
Need help?
General
