ZyXEL Communications GS2220 Series - Vendor ID Based VLAN

Chapter 9 VLAN
GS2220 Series User’s Guide
149
This feature allows users to change ports without having to reconfigure the VLAN. You can assign priority
to the MAC-based VLAN and define a MAC to VLAN mapping table by entering a specified source
MAC address in the MAC-based VLAN setup screen. You can also delete a MAC-based VLAN entry in
the same screen.
Click the MAC Ba se d VLAN Se tup link in the VLAN C o nfig ura tio n screen to see the following screen.
Fig ure 121 Advanced Application > VLAN > VLAN Configuration > MAC Based VLAN Setup
The following table describes the fields in the above screen.
9.11 Ve ndo r ID Ba se d VLAN
The Vendor ID based VLAN feature assigns incoming untagged packets to a VLAN and classifies the
traffic based on the source MAC address of the packet. When untagged packets arrive at the switch,
Table 57 Advanced Application > VLAN > VLAN Configuration > MAC Based VLAN Setup
LABEL DESC RIPTIO N
Name Type a name up to 32 alpha numeric characters for the MAC-based VLAN entry.
MAC Address Type a MAC address that is bind to the MAC-based VLAN entry. This is the source MAC
address of the data packet that is looked up when untagged packets arrive at the Switch.
VID Type an ID (from 1 to 4094) for the VLAN that is associated with the MAC-based VLAN entry.
Priority Type a priority (0 to 7) that the Switch assigns to frames belonging to this VLAN. The higher
the numeric value you assign, the higher the priority for this MAC-based VLAN entry.
Add Click Add to save the new MAC-based VLAN entry.
Cancel Click Ca nc e l to clear the fields in the MAC-based VLAN entry.
Index This field displays the index number of the MAC-based VLAN entry.
Name This field displays the name of the MAC-based VLAN entry.
MAC Address This field displays the source MAC address that is bind to the MAC-based VLAN entry.
VID This field displays the VLAN ID of the MAC-based VLAN entry.
Priority This field displays the priority level which is assigned to frames belonging to this MAC-based
VLAN entity.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in
the table heading row to select all entries.
Delete Click De le te to remove the selected entry from the summary table.
Cancel Click Ca nc e l to clear the check boxes.