ZyXEL Communications GS2220 Series - Ipv6 Global Setup

Chapter 8 Basic Setting
GS2220 Series User’s Guide
124
Fig ure 98 Basic Setting > IPv6 > IPv6 Configuration
The following table describes the labels in this screen.
8.10.4 IPv6 G lo ba l Se tup
Use this screen to configure the global IPv6 settings. Click the link next to IPv6 G lo b a l Se tup in the IPv6
Config ura tio n screen to display the screen as shown next.
Fig ure 99 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Global Setup
Table 40 Basic Setting > IPv6 > IPv6 Configuration
LABEL DESC RIPTIO N
IPv6 Global Setup Click the link to go to a screen where you can configure the global IPv6 settings on the
Switch.
IPv6 Interface Setup Click the link to go to a screen where you can enable an IPv6 interface on the Switch.
IPv6 Addressing
IPv6 Link-Local
Address Setup
Click the link to go to a screen where you can configure the IPv6 link-local address for an
interface.
IPv6 Global
Address Setup
Click the link to go to a screen where you can configure the IPv6 global address for an
interface.
IPv6 Neighbor
Discovery
IPv6 Neighbor
Discovery Setup
Click the link to go to a screen where you can configure the IPv6 neighbor discovery
settings.
IPv6 Neighbor Setup Click the link to go to a screen where you can create a static IPv6 neighbor entry in the
Switch’s IPv6 neighbor table.
DHCPv6 Client Setup Click the link to go to a screen where you can configure the Switch DHCPv6 client settings.