Chapter 9 VLAN
GS2220 Series User’s Guide
139
9.4 VLAN C o nfig ura tio n
Use this screen to view IEEE 802.1Q VLAN parameters for the Switch. Click Adva nc e d Applic a tio n > VLAN
> VLAN C o nfig ura tio n to see the following screen.
Fig ure 113 Advanced Application > VLAN > VLAN Configuration
The following table describes the labels in the above screen.
9.5 C o nfig ure a Sta tic VLAN
Use this screen to configure a static VLAN for the Switch. Click the Sta tic VLAN Se tup link in the VLAN
Config ura tio n screen to display the screen as shown next.
Table 51 Advanced Application > VLAN > VLAN Configuration
LABEL DESC RIPTIO N
Static VLAN Setup Click Clic k He re to configure the Static VLAN for the Switch.
VLAN Port Setup Click Clic k He re to configure the VLAN Port for the Switch.
Subnet Based VLAN Setup Click Clic k He re to configure the Subnet Based VLAN for the Switch.
Protocol Based VLAN Setup Click Clic k He re to configure the Protocol Based VLAN for the Switch.
Voice VLAN Setup Click C lic k He re to configure the Voice VLAN for the Switch.
MAC Based VLAN Setup Click Clic k He re to configure the MAC Based VLAN for the Switch.
Vendor ID Based VLAN
Setup
Click C lic k He re to configure the Vendor ID Based VLAN for the Switch.
To Next Page
Loading...
