GS2220 Series User’s Guide
457
C HAPTER 58
Ne two rke d AV Mo de
58.1 O ve rvie w
Aside from the Web Configurator in Standard mode that has a complete set of configuration for
network installation, you can switch to Networked AV mode. Networked AV mode contains just the
necessary configurations for setting up and managing audio-video traffic on your network.
AV over IP is the transmission of audio-video data over an IP network.
Use a browser that supports HTML5, such Microsoft Edge, Internet Explorer 11, Mozilla Firefox, or Google
Chrome. The recommended screen resolution is 1024 by 768 pixels.
The following sections introduces the configuration and functions of the Web Configurator In Networked
AV mode.
Click Ne tworke d AV at the top right of the Web Configurator to switch between the Web Configurator’s
Sta nda rd or Ne tworke d AV mode.
Fig ure 347 Web Configurator – Networked AV Mode Switch
58.2 Summ a ry
Use the Sum m a ry screen to see the Switch’s front panel port status, connected ports information,
networked AV information, used power for PoE devices, Nebula Cloud Control status, and a link to go to
the IP Se tup screen (
Section 62.1 on page 497).
The Sum m a ry screen displays when you log into the Switch in Networked AV mode.
To Next Page
Loading...
