Chapter 32 PPPoE
GS2220 Series User’s Guide
304
32.3.1 PPPo E IA Pe r- Po rt
Use this screen to specify whether individual ports are trusted or untrusted ports and have the Switch
add extra information to PPPoE discovery packets from PPPoE clients on a per-port basis.
Note: The Switch will drop all PPPoE packets if you enable the PPPoE Intermediate Agent on
the Switch and there are no trusted ports.
Click the Port link in the Inte rm e dia te Ag e nt screen to display the screen as shown.
Fig ure 231 Advanced Application > PPPoE > Intermediate Agent > Port
The following table describes the labels in this screen.
Apply Click App ly to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Sa ve link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Cancel Click Ca nc e l to begin configuring this screen afresh.
Table 148 Advanced Application > PPPoE > Intermediate Agent (continued)
LABEL DESCRIPTIO N
Table 149 Advanced Application > PPPoE > Intermediate Agent > Port
LABEL DESCRIPTIO N
Port This field displays the port number. * means all ports.
* Use this row to make the setting the same for all ports. Use this row first and then make
adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
To Next Page
Loading...
