ZyXEL Communications GS2220 Series - Multicast Setup; Ipv4 Multicast Status

Chapter 24 Multicast
GS2220 Series User’s Guide
227
Fig ure 172 MVR Multicast Television Example
24.2 Multic a st Se tup
Use this screen to configure IGMP for IPv4 or MLD for IPv6 and set up multicast VLANs. Click Adva nc e d
Applic a tio n > Multic a st in the navigation panel.
Fig ure 173 Advanced Application > Multicast Setup
The following table describes the labels in this screen.
24.3 IPv4 Multic a st Sta tus
Click Adva nc e d Applic a tio n > Multic a st > IPv4 Multic a st to display the screen as shown. This screen
shows the IPv4 multicast group information. See
Section 24.1 on page 223 for more information on
multicasting.
Fig ure 174 Advanced Application > Multicast > IPv4 Multicast
Table 96 Advanced Application > Multicast Setup
LABEL DESC RIPTIO N
IPv4 Multicast Click the link to open screens where you can configure IGMP snooping and IGMP filtering for
IPv4.
IPv6 Multicast Click the link to open screens where you can configure MLD snooping-proxy and MLD filtering
for IPv6.
MVR Click the link to open screens where you can create multicast VLANs.