ZyXEL Communications GS2220 Series - Firmware Upgrade

Chapter 46 Maintenance
GS2220 Series User’s Guide
391
Fig ure 299 Load Custom Default: Confirmation
46.3 Firmwa re Upg ra de
Use the following screen to upgrade your Switch to the latest firmware. The Switch supports dual
firmware images, Firm wa re 1 and Firm wa re 2. Use this screen to specify which image is updated when
firmware is uploaded using the Web Configurator and to specify which image is loaded when the
Switch starts up.
SwitchMake sure you have downloaded (and unzipped) the correct model firmware and version to
your computer before uploading to the device.
Be sure to uplo a d the c o rre c t m o de l firm wa re a s uplo a ding the wrong
mode l firm wa re m a y da m a g e yo ur de vic e .
Click Ma na g e me nt > Ma inte na nc e > Firmwa re Upg ra de to view the screen as shown next.
Fig ure 300 Management > Maintenance > Firmware Upgrade
The top of firmware upgrade screen shows which firmware version is currently running on the Switch.
Type the path and file name of the firmware file you wish to upload to the Switch in the File Pa th text box
or click Cho ose File or Bro wse to locate it. Firmware upgrades are only applied after a reboot. Click
Upg ra de to load the new firmware. Select the Co nfig Bo o t Ima g e drop-down list box if you want to
reboot the Switch and click Apply to apply the new firmware immediately. Click Upg ra de to load the
new firmware.