ZyXEL Communications GS2220 Series - Policy Example

GS2220 Series User’s Guide
219
22.3 Po lic y Exa m ple
The figure below shows an example Po lic y screen where you configure a policy to limit bandwidth and
discard out-of-profile traffic on a traffic flow classified using the Exa m ple classifier (refer to
Section 21.5
on page 214
).
Fig ure 169 Policy Example
Cancel Click C a nc e l to reset the fields back to your previous configuration.
Clear Click Cle a r to set the above fields back to the factory defaults.
Index This field displays the policy index number. Click an index number to edit the policy.
Active This field displays Ye s when policy is activated and No when is it deactivated.
Name This field displays the name you have assigned to this policy.
Classifier(s) This field displays the names of the classifier to which this policy applies.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete Click De le te to remove the selected entry from the summary table.
Cancel Click C a nc e l to clear the check boxes.
Table 94 Advanced Application > Policy Rule (continued)
LABEL DESCRIPTIO N