GS2220 Series User’s Guide
154
C HAPTER 10
Sta tic MAC Fo rwa rding
10.1 O ve rvie w
This chapter discusses how to configure forwarding rules based on MAC addresses of devices on your
network.
Use these screens to configure static MAC address forwarding.
10.1.1 Wha t You C a n Do
Use the Sta tic MAC Fo rwa rding screen (
Section 10.2 on page 154) to assign static MAC addresses for a
port.
10.2 Co nfig ure Sta tic MAC Fo rwa rding
A static MAC address is an address that has been manually entered in the MAC address table. Static
MAC addresses do not age out. When you set up static MAC address rules, you are setting static MAC
addresses for a port. This may reduce the need for broadcasting.
Static MAC address forwarding together with port security allow only computers in the MAC address
table on a port to access the Switch.
Click Adva nc e d Applic a tio n > Sta tic MAC Fo rwa rding in the navigation panel to display the
configuration screen as shown.
Fig ure 125 Advanced Application > Static MAC Forwarding
To Next Page
Loading...
Need help?
General
