Chapter 61 Switching
GS2220 Series User’s Guide
484
Fig ure 365 Switching > VLAN > VLAN Status > VLAN Detail
The following table describes the labels in this screen.
61.8 Sta tic VLAN
Use a static VLAN to decide whether an incoming frame on a port should be
• sent to a VLAN group as normal depending on its VLAN tag.
• sent to a group whether it has a VLAN tag or not.
• blocked from a VLAN group regardless of its VLAN tag.
You can also tag all outgoing frames (that were previously untagged) from a port with the specified
VID.
Use this screen to view static VLAN status for the Switch. Click Switc hing > VLAN > Sta tic VLAN to display
the screen as shown next.
Table 253 Switching > VLAN > VLAN Status > VLAN Detail
LABEL DESC RIPTIO N
VLAN Status Click this to go to the VLAN Sta tus screen.
VID This is the VLAN identification number that was configured in the corresponding VLAN
configuration screen.
Elapsed Time This field shows how long it has been since a normal VLAN was registered or a static VLAN was
set up.
Status This field shows how this VLAN was added to the Switch.
Sta tic : added as a permanent entry.
Port Number This column displays the ports that are participating in a VLAN. A tagged port is marked as T, an
untagged port is marked as U and ports not participating in a VLAN are marked as “–“.
To Next Page
Loading...
