Chapter 21 Classifier
GS2220 Series User’s Guide
208
21.2 Cla ssifie r Sta tus
Use this screen to view the classifiers configured on the Switch and how many times the traffic matches
the rules.
Click Adva nc e d Applic a tio n > C la ssifie r in the navigation panel to display the configuration screen as
shown.
Fig ure 163 Advanced Application > Classifier > Classifier Status
The following table describes the labels in this screen.
21.3 Cla ssifie r Co nfig ura tio n
Use the Cla ssifie r C o nfig ura tio n screen to define the classifiers. After you define the classifier, you can
specify actions (or policy) to act upon the traffic that matches the rules.
In the Cla ssifie r Sta tus screen click C la ssifie r C o nfig ura tio n to display the configuration screen as shown.
Table 87 Advanced Application > Classifier > Classifier Status
LABEL DESCRIPTIO N
Index This field displays the index number of the rule. Click an index number to edit the rule.
Active This field displays Ye s when the rule is activated and No when it is deactivated.
Weight This field displays the rule’s weight. This is to indicate a rule’s priority when the match order is set
to m a nua l in the Cla ssifie r > Cla ssifie r C o nfig ura tio n > C la ssifie r G lo ba l Se tting screen.
The higher the number, the higher the rule’s priority.
Name This field displays the descriptive name for this rule. This is for identification purpose only.
Match Count This field displays the number of times a rule is applied. It displays '–' if the rule does not have
count enabled.
Rule This field displays a summary of the classifier rule’s settings.
Any Select Any, then click Cle a r to clear the matched count for all classifiers.
Classifier Select Cla ssifie r, enter a classifier rule name and then click Cle a r to erase the recorded statistial
information for that classifier, or select Any to clear statistics for all classifiers.
Clear Click Cle a r to erase the recorded statistical information for the classifier.
To Next Page
Loading...
