EasyManua.ls Logo

ZyXEL Communications GS2220 Series - IGMP Filtering Profile

ZyXEL Communications GS2220 Series
556 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 61 Switching
GS2220 Series User’s Guide
494
Click Add or Edit button to open the following screen. Use this screen to configure a static VLAN for the
Switch.
Fig ure 372 Switching > Multicast > IGMP Snooping VLAN > Add or Edit VLAN
The following table describes the related labels in this screen.
61.14 IG MP Filte ring Pro file
An IGMP filtering profile specifies a range of multicast groups that clients connected to the Switch are
able to join. A profile contains a range of multicast IP addresses which you want clients to be able to
join. Profiles are assigned to ports (in the IG MP Snoo ping screen). Clients connected to those ports are
then able to join the multicast groups specified in the profile. Each port can be assigned a single profile.
A profile can be assigned to multiple ports.
Click Switc hing > Multic a st in the navigation panel. Click the IG MP Filte ring Pro file tab to display the
screen as shown.
Add
Edit
Click Add to create a new entry or Edit to update an existing one.
This saves your changes to the Switch’s run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the Sa ve link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Delete Check the entries that you want to remove, then click the De le te button.
Table 260 Switching > Multicast > IGMP Snooping VLAN > Add or Edit VLAN
LABEL DESCRIPTIO N
Name Enter the descriptive name of the VLAN for identification purposes.
VID Enter the ID of a static VLAN; the valid range is between 1 and 4094.
Add/Edit Click Add or Edit to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Clear Click Cle a r to have the fields display blanks.
Cancel Click Ca nc e l to change the fields back to their last saved values.
Table 259 Switching > Multicast > IGMP Snooping VLAN (continued)
LABEL DESC RIPTIO N

Table of Contents

Related product manuals