ZyXEL Communications GS2220 Series - Advanced Settings

Chapter 4 Web Configurator
GS2220 Series User’s Guide
64
4.4.2 Adva nc e d Se tting s
In Adva nc e d Se tting s, you can set up IP or DNS, set up your password, SNMP community, configure
Networked AV service to a VLAN, select and assign port role, link aggregation (trunking), and view
finished results.
In order to set up your IP or DNS, please do the following. Click Wiza rd > Adva nc e d Se tting s > Ste p 1 IP to
access this screen.
Networked AV VLAN
IP
This field displays the Switches’ IP address for it to be managed over the AVoIP network.
IGMP Snooping This field displays Ac tive when IGMP Snooping is enabled to forward group multicast traffic
only to ports that are members of that group.
Otherwise, it displays Ina c tive .
IGMP Snooping
Querier
This field displays A c tive when the Switch is allowed to send IGMP General Query messages
to the VLANs with the multicast hosts attached.
Otherwise, it displays Ina c tive .
Unknown Multicast
Frame
This field displays the action to perform when the Switch receives an unknown multicast
frame. It displays Dro p when the frames are discarded. It displays Flo o ding when the frames
are sent to all ports.
Transmitter/Receiver
Connected Port
This field shows the Switches’ port numbers for connection to networked audio and video
equipment.
Inter-switch
Connected Port
This field shows the Switches’ port numbers for connection to another switch.
Previous Click Pre vio us to show the previous screen.
Finish Review the information and click Finish to create the task.
Cancel Click Ca nc e l to exit this screen without saving.
Table 12 Wizard > Basic Settings > Step 4 Summary (continued)
LABEL DESC RIPTIO N