ZyXEL Communications GS2220 Series - GUI-Based FTP Clients; FTP Restrictions

Chapter 46 Maintenance
GS2220 Series User’s Guide
400
46.9.4 G UI- ba se d FTP C lie nts
The following table describes some of the commands that you may see in GUI-based FTP clients.
46.9.5 FTP Re stric tio ns
FTP will not work when:
• FTP service is disabled in the Se rvic e Ac c e ss Co ntrol screen.
• The IP addresses in the Re m o te Ma na g e me nt screen does not match the client IP address. If it does
not match, the Switch will disconnect the FTP session immediately.
Table 208 General Commands for GUI-based FTP Clients
CO MMAND DESC RIPTIO N
Host Address Enter the address of the host server.
Login Type Anonymous.
This is when a user I.D. and password is automatically supplied to the server for
anonymous access. Anonymous logins will work only if your ISP or service administrator
has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer Type Transfer files in either ASCII (plain text format) or in binary mode. Configuration and
firmware files should be transferred in binary mode.
Initial Remote Directory Specify the default remote directory (path).
Initial Local Directory Specify the default local directory (path).