GS2220 Series User’s Guide
262
Cancel Click this to reset the values above based on the last selected static binding or, if not
applicable, to clear the fields above.
Clear Click Cle a r to reset the fields to the factory defaults.
Index This field displays a sequential number for each binding. Click on an index number to view
more details or change the settings.
IP Address This field displays the IP address assigned to the MAC address in the binding.
VLAN This field displays the source VLAN ID in the binding.
MAC Address This field displays the source MAC address in the binding.
Port This field displays the port number.
Lease This field displays how long the binding is valid.
Type This field displays how the Switch learned the binding.
sta tic : This binding was learned from information provided manually by an administrator.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete Select the entries that you want to remove, then click the De le te button to remove the
selected entries from the table.
Cancel Click this to clear the check boxes above.
Table 120 Advanced Application > IP Source Guard > IPv4 Source Guard Setup > Static Binding
LABEL DESC RIPTIO N
To Next Page
Loading...
