ZyXEL Communications GS2220 Series - Page 338

GS2220 Series User’s Guide
338
Datum Select the appropriate geodetic datum used by GPS.
•WGS84
• NA D83- NAVD88
• NAD83- MLLW
Civic Address Enter the Civic Address by providing information such as Country, State, County, City, Street,
Number, ZIP code and other additional information. Enter at least 2 fields in this configuration
including the Country. The valid length of the Country field is 2 characters and all other fields
are up to 32 characters.
• C o untry
• Sta te
• C o unty
• C ity
• Divisio n
• Ne ig hb o r
• Stre e t
• Le a d ing - Stre e t- Dire c tio n
• Stre e t- Suffix
• Tra iling - Stre e t- Suffix
•House-Number
• Ho use - Num b e r- Suffix
• La ndm a rk
• Add itio na l- Loc a tio n
•Name
•Zip-Code
• Building
•Unit
• Floo r
• Ro o m - Num be r
• Pla c e - Type
• Po sta l- C o mm unity- Na m e
• Po st- O ffic e - Bo x
• Add itio na l- Co d e
ELIN Number Enter a numerical digit string, corresponding to the ELIN identifier which is used during
emergency call setup to a traditional CAMA or ISDN trunk-based PSAP. The valid length is
from 10 to 25 characters.
Add Click Add after finish entering the location information.
Cancel Click C a nc e l to begin entering the location information afresh.
Index This lists the index number of the location configuration. Click an index number to view or edit
the location.
Port This lists the port number of the location configuration.
Location
Coordinates
This field displays the location configuration information based on geographical coordinates
that includes longitude, latitude, altitude and datum.
Civic Address This field displays the Civic Address for the remote device using information such as Country,
State, County, City, Street, Number, ZIP code and additional information.
ELIN Number This field shows the Emergency Location Identification Number (ELIN), which is used to
identify endpoint devices when they issue emergency call services. The valid length is form
10 to 25 characters.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete Check the locations that you want to remove, then click the De le te button.
Cancel Click C a nc e l to clear the selected check boxes.
Table 171 Advanced Application > LLDP > LLDP-MED Location (continued)
LABEL DESC RIPTIO N