GS2220 Series User’s Guide
441
The following table describes the labels in this screen.
Table 231 Management > MAC Table
LABEL DESCRIPTIO N
Condition Select one of the buttons and click Se a rc h to only display the data which matches the criteria
you specified.
Select All to display any entry in the MAC table of the Switch.
Select Sta tic to display the MAC entries manually configured on the Switch.
Select MAC and enter a MAC address in the field provided to display a specified MAC entry.
Select VID and enter a VLAN ID in the field provided to display the MAC entries belonging to the
specified VLAN.
Select Po rt and enter a port number in the field provided to display the MAC addresses which
are forwarded on the specified port.
Select Trunk and type the ID of a trunk group to display all MAC addresses learned from the ports
in the trunk group.
Sort by Define how the Switch displays and arranges the data in the summary table below.
Select MAC to display and arrange the data according to MAC address.
Select VID to display and arrange the data according to VLAN group.
Select PO RT to display and arrange the data according to port number.
Transfer Type Select Dyna m ic to MAC fo rwa rding and click the Tra nsfe r button to change all dynamically
learned MAC address entries in the summary table below into static entries. They also display in
the Sta tic MAC Fo rwa rding screen.
Select Dyna mic to MAC filte ring and click the Tra nsfe r button to change all dynamically learned
MAC address entries in the summary table below into MAC filtering entries. These entries will then
display only in the Filte ring screen and the default filtering action is Disc a rd so urc e .
Search Click this to search data in the MAC table according to your input criteria.
Transfer Click this to perform the MAC address transferring you selected in the Tra nsfe r Typ e field.
Cancel Click Ca nc e l to change the fields back to their last saved values.
Index This is the incoming frame index number.
MAC Address This is the MAC address of the device from which this incoming frame came.
VID This is the VLAN group to which this frame belongs.
Port This is the port where the above MAC address is forwarded.
Type This shows whether the MAC address is dyna m ic (learned by the Switch) or sta tic (manually
entered in the Sta tic MA C Fo rwa rding screen).
To Next Page
Loading...
