Chapter 59 System
GS2220 Series User’s Guide
464
• The Ne b ula C o ntrol Ce nte r Disc o ve ry feature is enabled.
• The Switch has been registered in the NCC.
The C lo ud Ma na g e m e nt screen displays links to Ne bula Switc h Re g istra tio n which has a QR code
containing the Switch’s serial number and MAC address for handy registration of the Switch at NCC.
Click Syste m > Clo ud Ma na g e me nt in the navigation panel to display this screen.
Fig ure 351 System > Cloud Management
Select O n to turn on NCC discovery on the Switch. If the Switch has Internet access and has been
registered in the NCC, it will go into cloud management mode.
In cloud management mode, then NCC will first check if the firmware on the Switch needs to be
upgraded. If it does, the Switch will upgrade the firmware immediately. If the firmware does not need to
be upgraded, but there is newer firmware available for the Switch, then it will be upgraded according
to the firmware upgrade schedule for the Switch on the NCC. Below is the process for upgrading
firmware:
1 Download firmware through the NCC.
2 Upgrade the firmware and reboot.
Note: While the Switch is rebooting, do NOT turn off the power.
Disable O n to turn off NCC discovery on the Switch. The Switch will NOT discover the NCC and remain in
standalone mode.
This screen has a QR code containing the Switch’s serial number and MAC address for handy NCC
registration of the Switch using the Nebula Mobile app. First, download the app from the Google Play
store for Android devices or the App Store for iOS devices and create an organization and site.
To Next Page
Loading...
