Chapter 64 Maintenance
GS2220 Series User’s Guide
516
to select a monitor port and specify the traffic flow to be copied to the monitor port.
Fig ure 396 Maintenance > Port Mirror
The following table describes the labels in this screen.
Table 277 Maintenance > Port Mirror
LABEL DESCRIPTIO N
Active Select the check box to activate port mirroring on the Switch. Clear check box to disable the feature.
Monitor
Port
The monitor port is the port you copy the traffic to in order to examine it in more detail without
interfering with the traffic flow on the original ports. Enter the port number of the monitor port.
Port This field displays the port number.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set the
common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Mirrored Select this option to mirror the traffic on a port.
Direction Specify the direction of the traffic to mirror by selecting from the drop-down list box. Choices are
Eg re ss (outgoing), Ing re ss (incoming) and Bo th.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these changes if
it is turned off or loses power, so use the Sa ve link on the top navigation panel to save your changes
to the non-volatile memory when you are done configuring.
Cancel Click Ca nc e l to reset the fields.
To Next Page
Loading...
