GS2220 Series User’s Guide
74
ARP Table This link takes you to a screen where you can view the MAC addresses – IP address resolution
table.
Path MTU Table This link takes you to a screen where you can view the path MTU aging time, index, destination
address, MTU, and expire settings.
Configure Clone This link takes you to a screen where you can copy attributes of one port to other ports.
IPv6 Neighbor
Table
This link takes you to a screen where you can view the IPv6 neighbor table which includes
index, interface, neighbor address, MAC address, status and type.
Port Status This link takes you to a screen where you can view the port statistics.
Table 19 Navigation Panel Sub-links Overview (Networked AV Mode)
SUMMARY SYSTEM PO RT SWITC HING
Navigatio n Panel Sub-links Overview (Sur veillance Mod e)
NETWO RKING SECURITY MAINTENANC E
Table 20 Navigation Panel Links (Networked AV Mode)
LINK DESC RIPTIO N
Summary This screen displays the Switch’s front panel port status, connected ports, used power, Nebula
Cloud Control status, and Networked AV status.
SYSTEM
System
Information
This link takes you to a screen that displays general system information.
General Setup This link takes you to a screen where you can configure general identification information
about the Switch.
Cloud
Management
This screen displays a link to a screen where you can enable or disable the Ne b ula C o ntro l
Ce nte r Disc o ve ry feature. If it is enabled, you can have the Switch search for the NCC (Nebula
Control Center). Another link takes you to the Ne b ula Switc h Re gistra tion screen which has a
QR code containing the Switch’s serial number and MAC address for handy registration of the
Switch at NCC.
PORT
PoE Setup For PoE models.
This screen allows you to set priorities, PoE power-up settings and schedule so that the Switch is
able to reserve and allocate power to certain PDs.
Port Setup This screen allows you to configure settings for individual Switch ports.
Table 18 Navigation Panel Links (Standard Mode) (continued)
LINK DESC RIPTIO N