GS2220 Series User’s Guide
85
2 Go to Adva nc e d Applic a tio n > VLAN > VLAN C o nfig ura tio n > Sta tic VLAN Se tup, and create a VLAN with
ID of 100. Add ports 4, 5 and 6 in the VLAN by selecting Fixe d in the Co ntrol field as shown.
De-select Tx Ta g g ing because you do not want outgoing traffic to contain this VLAN tag.
Click Add.
Fig ure 61 Tutorial: Create a VLAN and Add Ports to It
3 Go to Adva nc e d Applic a tio n > VLAN > VLAN Config ura tio n > VLAN Po rt Se tup, and set the PVID of the
ports 4, 5 and 6 to 100. This tags untagged incoming frames on ports 4, 5 and 6 with the tag 100.
To Next Page
Loading...
