!"
9&&
This error indicates a safety hazard and prevents HIGH POWER
from being enabled.
User action: Check any user manual mode switch which may be in use. Verify
that the CIP is connected securely. Restart your V
+
controller to clear
the error and repeat the test. If the problem persists, contact Adept
Customer Service.
*[Fatal] OVF Trap* at aaaaaa m:n (None)
Explanation: An internal problem has occurred with the V
+
software or with the
system hardware.
User action: It would be appreciated if you would report the error to Adept
Application Engineering. Please include the details of the error mes-
sage and exactly what you were doing at the time the error
occurred.
To save programs that are in memory, you can restart V
+
tempo-
rarily by pressing CTRL+G. The robot servos will not function, but
you can STORE the programs. Then power down the controller and
restart the system.
*[Fatal] Priv Viol* at aaaaaa m:n (None)
Explanation: An internal problem has occurred with the V
+
software or with the
system hardware.
User action: It would be appreciated if you would report the error to Adept
Application Engineering. Please include the details of the error mes-
sage and exactly what you were doing at the time the error
occurred.
To save programs that are in memory, you can restart V
+
tempo-
rarily by pressing CTRL+G. The robot servos will not function, but
you can STORE the programs. Then power down the controller and
restart the system.
*[Fatal] Spurious Int* at aaaaaa m:n (None)
Explanation: An internal problem has occurred with the V
+
software or with the
system hardware.
User action: It would be appreciated if you would report the error to Adept
Application Engineering. Please include the details of the error mes-
sage and exactly what you were doing at the time the error
occurred.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
