!"
2
User action: None required if the correct task number was specified. Otherwise,
use the STATUS command to determine which task number should
have been used.
*Program task not in use* (–319)
Explanation: A program task cannot be accessed because it has never been used.
(Such program tasks do not use any system memory and do not
appear in the STATUS display.)
User action: None.
*Protected program* (53)
Explanation: An attempt has been made to list a program that is protected from
user access.
User action: None.
*Protection error* (–530)
Explanation: An I/O operation cannot be performed because (1) it attempted to
write to a disk that is write protected, or (2) the user does not have
the proper access status.
User action: Check the diskette to make sure the write-protect tab is in the cor-
rect position. Use an FDIRECTORY command to display the disk
directory. If the file has protected (P) or read-only (R) protection,
you cannot access it in the way attempted.
*Recursive macros illegal* (–357)
Explanation: An attempt was made to execute a macro recursively. That is, the
macro contained a command character sequence that (directly or
indirectly) restarted execution of the macro.
User action: Change the macro definitions as necessary to make sure neither
macro invokes itself. You can have the U macro invoke the Y macro,
or vice versa (but not both).
*Region too big* (–743)
Explanation: While using optical character recognition (OCR) to recognize text
(VOCR) or train a font (VTRAIN.OCR), a region in the given win-
dow was more than 63 pixels in the horizontal or vertical dimen-
sion.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General