!"
/
User action: Make sure there are no extraneous regions in the training window. If
the characters in the font are too large, use a camera lens with a
shorter focal length, or increase the distance between the camera
and the text.
*Region too complicated* (–744)
Explanation: While using optical character recognition (OCR) to train a font
(VTRAIN.OCR), a character region was encountered with more
than 20 concavities and holes.
User action: Look at the binary image (with VDISPLAY mode 2). Perhaps the
threshold needs adjustment.
*Remote has not exported network resource* (–563)
Explanation: The NFS server has not exported the designated path for use by cli-
ents.
User action: Check the NFS server setup, and check the path that the V
+
system
uses.
*Reserved word illegal* (–457)
Explanation: An attempt has been made to use a V
+
reserved word for a variable
name. (See V+ Language Reference Guide for a list of the reserved key-
words.)
User action: Use a different name for the variable. You can, for example, append
a prefix or suffix to the attempted name.
Return manual control pendant to background display (^C to exit) (None)
Explanation: The manual control pendant display must be in background mode
for the operation you have selected.
User action: Press the DONE button on the pendant one or more times to exit the
current function.
*Robot already attached to program* (–602)
Explanation: A program has executed more than one ATTACH instruction for the
robot, without executing a DETACH in between. Or an attempt has
been made to SELECT another robot when one is already attached.
The robot is still attached even after this error occurs.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General