92
TerraStar Settings
or
Serial Number—This box shows the serial
number of the receiver - used to purchase
TerraStar subscription.
Automatic Tuning check box—Receiver will
automatically select the strongest frequency.
Frequency drop-down box will be grayed out
when this is selected.
Frequency—In the Frequency drop-down list
box, select current geographic region. Only
uncheck automatic tuning when directed to by
Technical Support (used to adjust tuning).
Custom Frequency—User entered TerraStar
frequency. Only enter custom frequency when
directed to by Technical Support.
Convergence Threshold—The receiver uses
the standard deviation of the solution to
determine when the TerraStar position has
converged. The receiver will label the TerraStar
solution as “converged” when the horizontal standard deviation reaches the Convergence Threshold setting. Relaxing the
convergence threshold shortens the time before a TerraStar solution is reported as converged. However, it does not alter
the absolute behavior of the solution.
÷
NOTE!: The use of TerraStar® differential requires purchase of a subscription from an Ag Leader dealer. Settings
related to using satellite differential correction vary based upon geographic location. Setup details are explained on
the following pages. More specific information can be obtained through an Ag Leader dealer. Know the serial
number when contacting Ag Leader to set up the receiver.
RTK Settings - NTRIP External
Set GPS 6500 to “RTK External” when using NTRIP RTK on InCommand or when using external radio for RTK correction.
Differential Source
TerraStar
Differential Source
TerraStar-L
TerraStar Settings
Serial Number
BFN1420047289
Automatic Tuning
Frequency
Convergence
Threshold
Provider Settings
Custom
Frequency
Automatic Tuning
Differential Source
RTK External
To Next Page
Loading...
Need help?
General
