Data Management
33
PN 4004700–ENG Rev. K
Supported operations
• Multi-Product and Multi Channel liquid and Granular operations
• Rate Logged with ISO Modules
• Flow Logged with Proprietary Modules
• Single channel/drive planter
–Planter sections are mapped
• Site Verification
• Summary totals
Enable ISO XML Export
Display Backups
A display backup creates an exact clone of a display’s current contents. This includes all management information,
configurations, and logged data on the display. Backups should be taken at regular intervals through an operating season
to minimize any data loss in the event of a display failure. Display backups can only be used on a like display with the same
or newer firmware than the backup was created on. Example: a display backup from an InCommand 800 cannot be
installed on an InCommand 1200 display or vice versa. When a display backup is restored onto a display it will overwrite all
existing data on that display. Users moving data between multiple displays should use an .agsetup file instead of a backup
file to accomplish this task. .Agsetup files have the ability to merge and add data to a secondary display so there will be
no risk of data loss.
ibk3 files
• System backup file. Backup files are written to USB drive.
Create Backup File (USB drive Only)
Use to create backup file.
÷
Ag Leader recommends backing up the display regularly to prevent/minimize data loss in the event of a display
failure.
Restore Backup File
Upgrade Firmware
.fw3
• Firmware upgrade file for the display and control modules. Install firmware updates from USB.
To Next Page
Loading...
