Configurations
23
PN 4004700–ENG Rev. K
This setting allows the display to remain powered up after the vehicle power has been shut down. The display will
switch into standby mode and will appear to be shut off; however the power light will change to an amber color.
Pressing the touch-screen while it is in standby mode will immediately turn the screen back on again. For this feature
to work, the display must be connected to switched power.
Use / to specify a length of time for display to remain powered up in standby mode after the vehicle
power has been shut down.
÷
NOTE!: When the time specified in Key Switch Standby is nearly expired, then the amber-colored power light will
flash on and off immediately preceding shutdown. Touch the display to restart the Key Switch Standby countdown.
About button
Displays product licensing information and copyright information.
Memory
Adjusts information stored in the display’s internal memory.
• Create Backup.
Press to create a backup file of all configuration settings, products, and Grower-Farm-Field Management data
structure on the USB drive. Backup files are stored using the .ibk3 file format.
• Restore Backup.
Press to restore a backup file from the external data drive to the internal memory of the display.
• Clear Internal Memory.
Press this button to clear the internal memory of the display. The system will present a warning dialogue box
and ask if a backup file should be created prior to clearing the memory.
±
WARNING!: Once the system’s internal memory is cleared, this information is deleted and cannot be restored unless
a backup has been made.
View Module Firmware
Displays the Module Firmware Management screen, which is a list of all firmware modules and firmware versions that
are available for the display.
÷
NOTE!: The Module Firmware Management list includes module firmware that may not be running.
• Upgrade
Update module firmware with firmware stored on the display.
• Upgrade from USB
Upgrades an individual module directly from the USB.
• Suppress Upgrade Alarms
Display will no longer prompt to automatically upgrade modules.
Remove Patterns
÷
NOTE!: Pressing this button permanently erases all guidance patterns from the display’s memory.
To Next Page
Loading...
